Glue is one of the most integral parts of every DIY or repairing broken parts project. There are several modern brands available offering gluing solutions. But 5 second fix vs Bondic is a well-known brand for their incredible gluing performance.
The prime difference between these 2 gluing solutions is their working materials. 5 Second fix works well with electric equipment, glass, plastic, metal, wood, fabrics and more. Meanwhile, Bondic repairs broken pieces of all objects.
Apart from the above-discussed difference, some other factors divide them. This comprehensive guide aims to share in-depth differences between 5 second fix and Bondic.
5 Second Fix Vs Bondic – Comparison Chart
Read the comparison chart carefully to get specific comparison data. This chart will help you make a precise buying decision.
5 Second Fix Vs Bondic – What is the Difference?
We have shared the key differences; now, we will be looking into the in-depth discussion to clarify the dissimilarities of Bondic and 5 Second Fix.
1. 5 Second Fix
What is the 5 Second Fix?
The 5 second fix is a plastic liquid welding glue that hardens when exposed to UV light. It takes only 5 seconds to create permanent repairs and seals. You can efficiently join a wide range of materials using a 5 seconds fix, including metal and plastic. This glue is a lot different from typical adhesives and glues.
One of the best things about 5 seconds fix is that it can be used to reposition until you gain the expected result before completing the permanent weld. Painting and sanding can easily be done after applying this glue. Moreover, the surface will be less sticky. Where a normal glue fails, a 5 second fix gets the sealing or joining job done effectively.
Key Features:
- Joints 2 separate pieces of wood
- Reattaching broken pieces of a desk chair
- Whether it is a toy or a damaged panel of television, it rejoins broken plastic pieces efficiently
- Ceramic bowls and statues can also be repaired using 5 second fix
- It can repair your favorite shirt or a torn curtain
How to Use a 5 Second Fix?
The application process for the 5 second fix doesn’t take much time. Follow the below steps carefully.
- Step 01: Surface Sanding: Sand the surface thoroughly that needs fixing or rejoining. Sanding will ensure a strong bond. Also, the surface will absorb the plastic solution more.
- Step 02: Apply Liquid Solution: Apply a little amount of liquid solution over the damage or crack.
- Step 03: Ensure Total Bonding: Now, expose the applied area with UV light for 5 seconds. Thus, the glue will be hardened and ensure total bonding.
- Step 04: Check the Final Result: Check whether the glue perfectly seals the cracks or not. If you are dissatisfied with the outcome, continue the above steps until you are happy with the result.
Note:
- Wait for at least 24 hours before exposing the fixed item to water. After 24 hours, the sealed item will be dishwasher safe.
- Avoid applying a 5 second fix on the skin. It causes an allergic reaction.
Working Material of 5 Second Fix
You can use 5 seconds fix on numerous materials, including
- Plastic
- Polypropylene
- Wood
- Metal
- Fabric
- Ceramic
- Wiring
- Rubber
- Vinyl
- Leather
- Electric equipment
And many more
Pros & Cons of 5 Second Fix?
You will barely find a product that is 100% perfect; a 5 second fix is also no exception. In this section, we will be looking at the pros and cons of the 5 second fix.
Pros:
- Repairs Everything: Whether you require repair leather or fabric or ceramic, 5 seconds fix goes perfectly well with everything. Even regular glues can’t provide the necessary joints on rough surfaces. It permanently repairs rough surfaces too.
- Liquid Plastic Weld: As stated earlier, 5 second fix is a lot more different than other glues. It is stronger compared to regular glues. The glue creates durable and strong bonds. It dries quickly and doesn’t leave a sticky surface.
- Stable and Paintable: Impressive stability is one of the worth mentioning benefits of 5 second fix. It creates strong joints between 2 materials that last long for many days. Besides, after applying it, the surface or material can be painted. Thus, everything looks new and fresh.
- Super-Resistance: High heat resistance characteristics of 5 second fix will surely impress you. It resists -40° C to +150° temperature without trouble.
- Repairs Damage within 5 Seconds: It takes only 5 seconds to repair damage or cracks of a material. The glue uses plastic glues and UV light to repair a crack. Moreover, it doesn’t leave a sticky surface behind.
Cons
- Can’t Joints without UV Lights: Sadly, 5 second fix is nothing without the UV light. In order to get the best result, the glue needs to be exposed to UV light; otherwise, nothing will happen. In this case, you have to give enough time for the alignment of the materials. Once you are satisfied with the alignment, expose the glue to UV light and get a hardened joint.
- Have Allergic Reaction: Unfortunately, 5 second fix causes an allergic reaction when it contacts the skin. Since a few harmful chemicals are used in its formula, which is responsible for the allergic reaction. However, wear hand gloves and be careful when applying a 5 second fix on a broken material.
Price of 5 Second Fix
The regular price of a 5 second fix is between $15 – $20. However, the price may vary based on the country, different events and occasions.
2. Bondic
What is Bondic?
Bondic is the first UV light liquid glue, performing as a great alternative to 5 second fix while their working procedure is almost the same. Instant repairing of glass, metals, fiberglass, leather, ceramic and whatnot is easy with Bondic. You can successfully repair cracks within 4 seconds using Bondic.
It creates a long-lasting bond between everything. The great thing about Bondic is that it effectively resists acid, lubricants, water, oil, and heat when the bond is created properly. It means nothing breaks the glue once it is dried properly. Moreover, you will get a smooth finish as it can be sanded. To learn more about Bondic, read the complete Bondic Glue Review.
Key Features:
- A liquid plastic joint works great under pressure, sunlight, etc.
- Leaves non-sticky surface
- Delivers long-lasting performance
- Far superior to most superglues available today
- Anyone can use it without technical knowledge
How to Use Bondic?
Apply Bondic following the below step.
Step 01: Sanding:
The first step is crucial for an effective result. Clean the surface thoroughly and then get sandpaper to sand the damaged area. After completing the sanding process, blow off any shavings. You can also skip sanding if you need temporary bonding.
Step 02: Apply the Adhesive:
Applying Bondic glue is effortless because it comes with an adhesive in a small bottle. At the same time, the bottle reduces the wastage of Bondic. Sometimes you need to apply the utmost small amount of Bondic. In comparison, some damaged parts require more Bondic. While applying, make sure that the UV part can hit the glue. When repairing 2 materials, it is advisable to glue one of them.
Step 03: UV Light Pointing:
This step is to cure the glue. Hold the UV light source and point the beam directly towards the glue. Make sure to hold the UV light source for a minimum of 4 seconds. If you apply the glue on a larger part, hold the UV beam in different areas for 4 seconds. This means, for curing glue of larger parts, you may need more than 1 minute.
Step 04: Repeat If Necessary:
Bondic is well-known for creating a durable and strong bond. You can apply more glue to the damaged part depending on the bond you want. If you need more Bondic for a robust joint, apply more Bondic without hesitation. Remember, applying a thick layer at once is less beneficial than applying several thin layers of glue. Before applying Bondic for the second time, ensure that the glue is perfectly cured. Otherwise, achieving good results will be difficult.
Step 05: Shaping:
The glued area may not look good. For this reason, use a sander to smoothen out the area. If you require it, paint it. Since Bondic is performing as a filler, cleaning and smoothing the area is necessary.
Working Material of Bondic
Bondic works on a range of materials which are,
- Wood
- Plastic
- Leather
- Vinyl
- Polypropylene
- Stone
- ceramic
- Glass
- Fiberglass
- Tiles
- Brick
In fact, there are hardly any materials that don’t work with Bondic.
Pros and Cons of Bondic
Bondic is an effective glue, working effectively with the help of UV light and liquid plastic formula. It offers the below benefits.
Pros:
- Robust and Quick: Bondic creates a robust bond between the damaged materials. The bond is extremely sturdy, and the performance of the broken material will be similar to a new one. It permanently joints 2 broken parts in 4 seconds only.
- Multifunctional: You might have experienced that all glues are not good performers with uneven or rough surfaces. The good news is that Bondic delivers the same consistent result with both even and rough surfaces. Whether repairing requires wiring, plastic, cable, wood, metals or other materials, Bondic performs efficiently with all surface types.
- Less Mess: Most glues are messy and sticky. You will love to know that Bondic is less messy as its liquid formula is totally different from other glues. Wiping off the excess Bondic is much easier using a wet cloth. Moreover, it will not leave a sticky surface.
- 100% Safe: Some glue liquids are unsafe to use because of their allergic reaction on the skin, leading to dangerous health issues. The biggest benefit of Bondic, it has a harmful chemical-free formula. If a small amount of Bondic stacks are in your skin, you will never experience an allergic reaction. It is 100% safe to use, and no harmful chemical is included in its formula.
- Easy to Use: Using Bondic is extremely effortless. While joining broken materials with Bondic, you will need to go through cleaning, applying, curing, sanding processes. You can easily apply Bondic from its small bottle. Impressively, it doesn’t dry even if you open the cap for many days. You can use it for many days.
- Highly Resistant: The joints of the Bondic are incredibly resistant to heat, temperature, weather and water. You can do it without thinking twice if you need to wash joints after curing Bondic properly.
Similar to everything, Bondic also has drawbacks.
Cons:
- Need to Buy Refills: To get a better bond, Bondic requires to apply more on the broken parts. Thus, it finishes quickly. So, refilling becomes necessary.
Price of Bondic
Each unit of Bondic liquid glue will cost you $26.
5 Second Fix vs. Bondic – Which is Better?
With all the above discussions, overall reviews and details, Bondic is the winner for everyday use. A 5 second fix is a good option for repairing flat and clean surfaces. It has skin-related reactions. While Bondic is 100% safe to use and doesn’t have any harmful chemicals in its formula. So, there will be no skin-related concerns with Bondic.
Bondic also effectively resists temperature, water, weather, pressure and heat than a 5 second fix. Moreover, Bondic comes with 80 drops of material; on the other hand, 5 second fix has 50 drops of material. This means Bondic takes a long time to finish compared to a 5 seconds fix. Additionally, Bondic takes only 4 seconds to penetrate a crack, but a 5 second fix takes 5 seconds.
According to the above discussion, Bondic is the clear winner against 5 second fix.
Frequently Asked Question
Can Bondic be used on teeth?
A dentist develops Bondic in the UK. The tooth fillings process uses a UV curing adhesive, similar to Bondic. The dentist uses the same formula for many repairs and applications. Later, he realized that the formula could also offer benefits in other industries. Bondic can repair almost anything related to teeth.
Can 5 seconds fix repair metals?
A small amount of 5 second fix is enough to repair metals. However, you may require more if the crack or damage is larger. It is also compatible with plastic, wiring, glass, wood, etc.
Final Words
Hopefully, you know which is better, between 5 second fix vs. Bondic. According to many factors, Bondic is a better than 5 second fix. Bondic is a good option for rejoining broken pieces of glass, wood, plastic, stones, ceramic, etc. In fact, Bondic performs well with all materials. While 5 second fix also performs well, it is not as good as Bondic.
Both liquid glue types are designed for the same purposes. Still, Bondic outweighs the 5 second fix with many useful features like safe use, no harmful chemicals in the formula, suitable for uneven and rough surfaces, etc.
